|
Post by no3Ljm on Sept 23, 2007 2:32:10 GMT 8
yeah i do that... but mern padin naiiwan n seam? dpt b as in no more seam or mern lng mark na andun ung seam before then when you paint it tska mawawala? gets nyo b? pagod na nga ako kaka-sand... i'm just afraid na baka maubos ung plastic kakasand ko.. hahaha.. seam is really erased when you paint it afterwards with primers and paints. don't sand too much. ninipis yung kit. you can feel naman both plastics if there were no more seams di ba. slide your nails in between them (closed seams), it the level of obth plastics are equal na, i guess that's the time to stop sanding. makakapa mo naman yung uka o hindi. just remember the mark will still be there unless you paint it.
|
|
|
Post by 蠍座 shinn on Sept 23, 2007 6:53:30 GMT 8
ayown!!! that's the answer i was looking for... this line---"just remember the mark will still be there unless you paint it."---tnx noel...
tnx to everybody who gave their advices...
|
|
|
Post by no3Ljm on Sept 23, 2007 9:44:13 GMT 8
i guess, if you pulled it off nicely by sanding, the seamlines would not be visible. or sad part is... some marks will still be there. that's based on my experience. there was a time that i sand too much just to erase the seams on this certain parts, afterwards the part becomes out of proportion. so what you will do is sand also the other portion the same. kumbaga, hahabulin mo naman sa kabila. which sucks by the way.
|
|
|
Post by 蠍座 shinn on Sept 24, 2007 11:54:25 GMT 8
hehe.. until mapansin m nalng na you're just holding a tiny little plastic nalng... hahaha.. ubos na!! hehe.... (knock on wood) ;D
|
|
|
Post by 蠍座 shinn on Sept 25, 2007 20:25:53 GMT 8
|
|
|
Post by jnthn on Sept 25, 2007 23:07:23 GMT 8
that's cool! i never get tired of looking at those poses...
did you have a hard time building the strike freedom's wings at all? any problems opening and lifting the wings up like you did? coz i've read somewhere and my friend also had issues with the wings not holding or locking up coz they're too heavy..i don't know this yet coz i haven't built mine...
|
|
|
Post by no3Ljm on Sept 25, 2007 23:26:42 GMT 8
@shinn great new updates on old kits. loev the pose on Strike Freedom.
@jnthn can i answer this one? i build mine and i haven't notice any problems with it. IMHO, Strike Freedom's wings has a great mechanism that works out fine. as long that you snap all the parts in places then it's all good. actually, i was so amazed after i finished building the wings. i didn't know it at first that when you open up the wings in FB mode, the dragoon holders slides. but you just have to slide manually the rest of the holder just to expand it more. the rest, it's ok naman. no problem with my wings. this is the best 'wing' so far on any MG kit. it's stable and it's amazing. if ever there's still some problems you can check naman dalong's site for its review.
hope that helps.
|
|
|
Post by jnthn on Sept 25, 2007 23:43:40 GMT 8
@jnthn can i answer this one? i build mine and i haven't notice any problems with it. IMHO, Strike Freedom's wings has a great mechanism that works out fine. as long that you snap all the parts in places then it's all good. actually, i was so amazed after i finished building the wings. i didn't know it at first that when you open up the wings in FB mode, the dragoon holders slides. but you just have to slide manually the rest of the holder just to expand it more. the rest, it's ok naman. no problem with my wings. this is the best 'wing' so far on any MG kit. it's stable and it's amazing. if ever there's still some problems you can check naman dalong's site for its review.
hope that helps.
thanks! coz my friend just given me a heads up and told me that his wings kept fallin' / foldin' down...konting tip mo lang, bumabagsak na agad yung wings parang di daw mag hold up or lock up yung wings in dragoon mode....ayaw daw mag stay na naka-open or bumuka yung wings....i told him to go to dalong's site..
|
|
|
Post by 蠍座 shinn on Sept 26, 2007 10:05:25 GMT 8
noel's right, no problem at all... the wing's pretty tight.... naglolock nman cya.. bka nman ur friend didn't snap it well kya medyo maluwag... it's been like that for like a whole month now and i play with the dragoon pieces... tanggal-balik... but ung pose right now, i think satisfied nko... the not-so-full-burst-mode... ;D BUT there's one little problem... the guns!!! i dunno if d lng ako marunong magayos but i can't pose the guns right.... heheh... pag cnunod m kc ung sa catalog, it looks ridiculous... un lng... noel nd jnthn tnx for the comments guys...
|
|
|
Post by jnthn on Sept 26, 2007 11:06:06 GMT 8
|
|
|
Post by raps on Sept 26, 2007 14:52:03 GMT 8
Nice pics... I like the Gundam RX-78 dark background....
|
|
|
Post by kingaL on Sept 26, 2007 16:21:54 GMT 8
cool link bro!! @shinn: nice poses..never gets tired looking at those poses!!
|
|
|
Post by 蠍座 shinn on Oct 8, 2007 8:04:23 GMT 8
Hi guys! got this one last night.. this is my first and only hcm-pro figure as of now... hope you enjoy it... more to come! ;D
|
|
|
Post by no3Ljm on Oct 8, 2007 10:34:03 GMT 8
nice HCM-Pro RX-78-2 figure bro. i think that version is Tomino's original color schemes that Sunrise didn't approve. the 'Feddie's White Mobile Suit'.
|
|
|
Post by raps on Oct 8, 2007 15:03:36 GMT 8
Nice catch.... a Limited HCM-pro... all white... that's a real pimp Gundam..
|
|