|
|
Post by silentcomet on Apr 3, 2007 1:26:32 GMT 8
Silent's Mobile Suits in Action...
The ones with boxes:
Lying down (L-R): Blaze Zaku Phantom, Blast Impulse Gundam, Buster Gundam, Jegan, Nu Gundam, GP02A Physallis
Standing Up (1st Layer, L-R): Gaia Gundam, Windam (Production Colors), Gouf Ignited, Strike Gundam, Gundam TR-1 [Hazel], Gundam Mk II with Flying Armor, Gaza C (Haman Custom), Dom 2nd Version
(2nd Layer, L-R): Kampfer, Dagger L, Dark Dagger L, Gundam Unit 4, Gundam Unit 5, Hi-Zack (EFF Custom)
(3rd Layer, L-R): Char's Z'gok, GM and Launch, Zudah, Aile Strike Gundam, Providence Gundam, Gouf Custom
Ones with no boxes:
(L-R): NT-1 Alex, Gundam EZ08, Zolo (from V Gundam), Rick Dias (Quattro Custom), GM with Ball, Space Leo, Zaku I (Black Tri-Stars Custom), Zeon Occupation Set (Zaku II, Luggun Carrier, Magella Attack Tank, Dopp Fighter)
Sieg UC ERA!
|
|
|
|
Post by silentcomet on Apr 3, 2007 1:30:30 GMT 8
The GAT-04 Windam (Production Colors)
Number of Parts: 1 Windam Figure + 11 parts + Collector's Card
Colors: white, blue, turquoise, gray, yellow
Gimmicks: beam rifle, shield, beam saber hilt + magenta beam blade (2), large anti-armor penetrator (2), small anti-armor penetrator (2), trigger finger hand (2), open palm hand (2), closed fist (2), ability to combine with Striker Packs accessory packs
Head: Perfect!, painted mostly in white, with some parts of the upper head painted in turquoise and blue. The main and secondary cameras are painted in turquoise. The supposed to be gundam-only V-fin is painted in yellow.
Torso: it is very articulated, paint job is amazing, the windam has side-openings for the Stiletto armor penetrators, skirt is painted in white. It also features 2 holes on the back to attach the different Striker Packs (Strike's Striker packs not compatible though).
Arms: painted in white and 3 holes are made for the shield, shoulder armor is cool! 
Legs: do i need to say more? hehehe...
Weapons and Accessories:
Beam rifle- The Windam comes with a large beam rifle. The detailing great and the painting of the targeting scope is perfect. The rifle features a swiveling handle grip.
Shield- The detailing and paint job are amazing, highly visible panel lines, even the shield's missiles are well painted with brilliant red. The wrists on each forearm have a total of three rectangular slots, each of which can be used to attach the shield on. Using these slots together with the sliding handlebar solidifies the Windam's grip on the shield, making it easier to pose.
Beam sabers- The beam saber hilts fit well inside the grip of each open hand and attaches to the clips atop each waist storage. The beam saber blades are molded with hardened plastics that are very strong and sturdy with little chance for bending and warping.
Stiletto Anti-armor Penetrators- The anti-armor penetrators come in two sizes, large and small. The small ones are used for storage inside the hip-mounted compartments on either side of the Windam's waist. The large penetrators are the ideal size for fitting inside the open hands included with the package.
Note: The Jet Striker only comes with the GAT02L2 Dagger L and the Windam Neo Roanoke Colors while the Dopplehorn Striker pack only comes with the Dark Dagger L.
Overall Rating: ;D ;D ;D ;D 
4 1/2 since this MSiA needs the other 3 to have a Striker Pack, heck i wish bandai would produce this again and have the Nuclear Packs.
|
|
|
|
Post by silentcomet on Apr 3, 2007 1:34:09 GMT 8
The GAT-02L2 Dagger L Series
Number of Parts:
Dagger L Production Colors: 1 Dagger L Figure + 18 Parts + Collector's Card
Dagger L Phantom Pain Colors: 1 Dagger L Figure + 14 Parts + Collector's Card
Colors:
Mass Production: blue,red,white,gray
Phantom Pain Colors:yellow lime, grayish black, turquoise, black, maroon
Gimmicks: (2) closed hands, (2) trigger hands, (2) beam saber hands, shield, M703k beam carbine, beam sabers (2), Stiletto anti armor penetrators: big(2), small(2)
MP: Jet Striker pack, AQM/E-A4E1 Propellant Tank, beam carbine mount, AQM/E-A4E1 Mk 438 "Wurger" air-to-air missile pods
PP: Dopplehorn Striker pack, low-recoil cannon
Head:greatly articulated ;D
Torso: interesting 
Arms: double-jointed as usual
Legs: a-ok ;D
Overall Rating:
Mass Produced: ;D ;D ;D ;D
since the Drache missiles wasn't included in the package
Phantom Pain: ;D ;D ;D ;D ;D
WOW!
|
|
|
|
Post by silentcomet on Apr 3, 2007 1:37:17 GMT 8
MSiA RGM-79 GM Version 2
Number of Parts: 1 GM Figure + 1 Launch Shuttle Figure + 12 Parts + Collector's Card
Colors:bluish-white,red,yellow,green,black,gray
Gimmicks:trigger hand (2), open hand (2), fist (2), beam spray gun, GM Cold Climate's machine gun, GM Command's beam gun, beam saber, shield, Launch shuttle
Head: the head of the ms is great, it is greatly detailed and actually proportional to the body of the gm, it is painted nicely with a green for the main camera and the backup cameras but the head is painted in a bluish-white scheme, it can also move very well.
Torso: it is well painted and has an opening cockpit in which the pilot is colored yellow, it is greatly detailed and the backpack fits well on the "peg" on its back, the skirt armor is painted in a bluish-white scheme and has a bazooka rack/hole on its back skirt (even though the gm doesn't come with a bazooka T_T)
Arms: it is well painted in a bluish-white color and moves properly and is double jointed unlike the version 1. a very good upgrade i say.
Legs: well painted still in a bluish-white color, very detailed and even the "foot" boosters have a great detail. a great improvement over the version 1.
Weapons and Accessories:
Hands- Comes with 2 fists, 2 beam saber hands, and 2 gun hands.The beam saber hand's thumbs are molded to the pointing finger so that the beam saber cannot fall out.
Shield- The shield is painted in white, red, and yellow and has a handle and an arm connector, both of which are connected to the shield via ball-joint.
Beam saber- the beam saber fits well in the backpack and hands and the translucent pink beam fits in the beam saber handle snugly. Great improvement over the version 1!
Beam spray gun- The normal gun that a GM has, this gray weapon is molded a lot better than the GM 1.0. It fits into the hands well.
GM Command's beam gun- This new weapon fits into the hands well and features a gray, red, and white paint scheme. The e-pac can be removed.
GM Cold Climate's submachine gun- It features a magazine on the side which is removable and a removable magazine/ grenade launcher and can be replaced with just a magazine. It is molded in gray and red and fits in the hands well.
Launch shuttle- This neat little ship is featured in the last episode of Mobile Suit Gundam when the White Base crew escapes the exploding White Base. It is molded in lime green, black, white, red, and gray It features movable thrusters.
overall this is a great MSiA and if you're a Gundam Fan i recommend you to buy it ASAP!...
Overall Rating: ;D ;D ;D ;D ;D
|
|
|
|
Post by silentcomet on Apr 3, 2007 1:57:10 GMT 8
MSiA MS-09 Dom (Second Version)
Number of Parts: 1 Dom Figure + 13 Parts + Collector's Card
Colors: purple, red, gray, gunmetal blue, pink, black, yellow
Gimmicks: giant bazooka, 880mm Raketen bazooka, two heat Sabers(white and yellow), Sturmfaust, Sturmfaust rack, spare hands (9) [(2)trigger,(2)saber,(1)closed hands together, (1)opened freely,(1)grabbing]
Head- its a solid piece of plastic attached to the torso by a double ball joint. The head can swivel and be raised/lowered into a number of positions. Painted beautifully!
Torso- the waist consists of a ball joint that has a full range of motion, you can even rotate it all the way around and back again. It can also be moved so that it can bend forward, to the side, and backward. On the back the two thruster nozzles are able to rotate a full 360 degrees in their sockets. The heat saber’s storage rack on the back is detailed and has a ball joint. The skirt has three discrete holes in them, one on the back and one on each of the sides that allow for the bazooka and sturmfaust racks to be attached. The scattering beam gun built into the chest is a detailed as it could possibly be.
Arms- the arms are double jointed .The hands are attached by ball joints.
Legs- the legs are capable of being placed into (almost) any pose that can be imagined. The knees are double jointed. The feet are jointed in a manner similar to the Zaku ver. 2. The bottom of the feet are attached to the rest of the foot by a ball joint, which is then attached to another ball joint that attaches to the rest of the leg, allowing for a wide range of movement.
Weapons and Accessories:
880mm Raketen bazooka- this bazooka is well designed. The trigger is movable to allow for a number of possible poses.
Detachable ammo clip- the ammo clip is fully detachable from the bottom of the 880mm Raketen bazooka.
Giant bazooka- the stand on the end can move up and down and the secondary hand grip can also rotate.
Bazooka rack- the bazooka rack plugs into a hole on the rear skirt armor.
Heat sabers- there’s a deactivated one (white) and active (yellow). They can be stored on the back.
Sturmfaust- the Sturmfaust is clumsy looking. I think it would look better smaller and slimmer. It attaches to the body by a Sturmfaust rack.
Sturmfaust rack- the rack is rather a ring that plugs into the sides of the Dom’s skirt armor.
Overall Rating: ;D ;D ;D ;D ;D actually if i could add another 1 ;D
this is actually beyond perfect in my words though..this is just one heck of a MSiA and im really loving it!...
|
|
|
|
Post by immaterial on Apr 3, 2007 2:38:26 GMT 8
Hm? I thought you said you had two other DOMS?..Where is the diorama you said you were going to make?
|
|
|
|
Post by qb on Apr 3, 2007 4:55:26 GMT 8
Hey! Nice! you've finally posted your collection! Uh, did you modify the shield on the GM? Not really into the grunt MS's 'cept for the Zaku's but looking at those Daggers...hmmm.... nice.... ;D Nice collection you got there bro!  |
|
|
|
Post by silentcomet on Apr 3, 2007 14:47:57 GMT 8
@ immaterial yep i do have two other doms but they're version 1s...ive just noticed when i compared the v1 with the v2 that the v1 looks like cr*p and couldnt properly do the head smashing mode... as for the dio..im planning on getting two more version 2s (that is if i could find stocks of them)...and just use the v1 as an add-on to my odessa campaign dio.. (having a hard time making the perfect stands for them..Jet Stream Mode..) ninja nope i didnt modify the shield of the gm..just added some decals to it...yep thanks glad you liked the daggers...actually there are plenty more that are not seen on the very first pic...since i only took pictures of the ones with their boxes...(note my MSiA The O and MSiA Chaos Gundam was sold to my cousin for twice the price of each MSiA, thats why you cant see them in the pic..) |
|
|
|
Post by qb on Apr 3, 2007 20:20:08 GMT 8
you still have plenty left to take pics of bro.... i see a hazel...a jegan... a gaia.... strike....buster....hehe.... ;D fun with msia... ;d
|
|
|
|
Post by no3Ljm on Apr 4, 2007 8:53:08 GMT 8
wow! nice MSiA collection, bro. cool!
|
|
|
|
Post by immaterial on Apr 12, 2007 8:27:16 GMT 8
The bazooka is a clay bazooka from the rick dias right? @_@
|
|
|
|
Post by qb on Apr 13, 2007 1:53:10 GMT 8
The bazooka is a clay bazooka from the rick dias right? @_@ I think you're right. The body is from an MSiA Gundam Alex while the head is from the first version GM...the one that comes with a Ball figure, right? |
|
|
|
Post by archaznable on Apr 14, 2007 0:20:58 GMT 8
nice update silentcommet ..... you really are collecting a lot of old MSIA. ;D I too am searching for those old MSIA. |
|
|
|
Post by silentcomet on Apr 14, 2007 16:28:56 GMT 8
ninja: yes it is. unfortunately those were my extras and i scrapped them both (since i got another msia alex and gm ver 1 for xmas about 2 years ago). note though that that mod is not yet finished and im still modding it. arch: thanks, actually i prefer the Mass-produced ones over gundams, don't know why though, probably with the comment that "You dont send one gundam to win a war, you send massive mobile suits to win it!" hehehe.
|
|
|
|
Post by silentcomet on Apr 14, 2007 16:52:18 GMT 8
Okay, back to business..
The ZGMF-X88S Gaia Gundam
Colors: black, yellow, gray, red, turquoise
Number of Parts: 1 Gaia Gundam Figure + 10 parts
Gimmicks: Transformation
This is my favorite of all the Armory One Gundams, the black over gray/red scheme, perfect combination for a villain..now lets go on with the review.
Head: The head is finely sculpted , it is painted black, with red on the somewhat chin of the gundam and some gray for the "nose"..the eyes and secondary camera are colored turquoise, it can rotate up to 360 degrees and they even got the trademark menacing-look of the Gaia.Perfect!
Torso: The Torso is finely sculpted, it is painted in black, the exhausts are colored gray with its outer rims colored yellow, the opening hatch of the cockpit is colored red, the back of the gaia has 2 attachments for the blades, and for the skirts, it is just amazing! since this machine has no front skirt armor, the gaia is very poseable, the back skirt armor is painted in black with its ends painted in yellow it has a somewhat "tail" on its back skirt armor (this is for the MA mode).
Legs: The Legs are painted in black, it is very poseable and sturdy to support the weight of the ms itself, however when it comes to the feet, it can be a pain in the *** (literally) posing it properly since you need to balance it completely for it to stand up. its feet are painted in red and black.
Weapons:
Beam Rifle- it is painted in gray, with some black and yellow, the targeting scope is painted in blue and white.
Beam Sabers- just like what the beam sabers of the MSiAs nowadays, perfect and sturdy.
Beam Blades- it is painted in gray with the thrusters painted in red and black, they are lightweight enough to not interfere with the gaia's ability to stand. the beam blades fit snugly into holes on either end of the wing.
Shield- it is painted in black with the top and bottom edges painted in red. the gaia's shield lacks a peg to insert into the arm, so it carries the shield about on a small ball-joint-mounted handle. the handle comes out pretty easily, but this is probably the only shield on an msia i've ever had that can be held forward vertically without tipping over. it has pegs to insert onto the gaia's chest when in ma mode.
Mobile Armor Mode- it can transform itself into a BuCue Hound-like form. for notes about transforming it. dont worry bandai has provided instructions for it. btw. it looks very very cool in this mode!
Final Rating: ;D ;D ;D ;D
the only thing i find irritating about this msia are the feet, its a pain in the *** (literally) when you're trying to pose this. other than that its a solid figure.
|
|
