|
|
Post by j.sonic on Mar 8, 2009 17:29:00 GMT 8
Just came from GT Greenhills, the two stocks they received yesterday are gone.  Drat, foiled again! |
|
|
|
Post by V2 on Mar 8, 2009 19:53:33 GMT 8
tsk... and i advised malvs to bring in hordes of the thing...
better wait for "survivor: seravee season 3" then...
|
|
|
|
Post by j.sonic on Mar 10, 2009 17:31:44 GMT 8
Amazing Race is more like it. ;D Haha!
|
|
|
|
Post by RainerO on Mar 10, 2009 18:35:10 GMT 8
There's another alternative place as dek posted. ;D
|
|
|
|
Post by qb on Mar 10, 2009 21:07:22 GMT 8
There's another alternative place as dek posted. ;D no go there as well. both have already been bought. V2just wondering.... i checked the steps on the transformation: you remove the Serafim head when transforming from MS to backpack mode? aren't you just supposed to slide it downwards? personally, i found the backpack a bit flimsy especially with the awkward position of the Serafim head when slid in. also the V-fins in non-burst mode Gundam face seems to pop out easily on mine. does that happen to you as well? |
|
|
|
Post by V2 on Mar 10, 2009 21:48:39 GMT 8
yes.
the instruction's pic shows that you have to "slide" the seraphim head down. however the main sensor ends up raised with the seraphim's head antennas sticking out - there's just not enough depth to go down any further nor space to hide the antennas in. does this happen to yours?
ironic? yes because the last pic shows you a perfectly-closed gundam head in backpack mode. i'd say it was overlooked by the guy who did the documentation or something.
and so, to achieve that perfectly-closed gundam head, you just have to remove the seravee head itself. the main sensor doesnt flop around anyway, so it's fine that way.
nope. my v-fins are pretty tight. you can try applying some nail polish to tighten yours.
|
|
|
|
Post by qb on Mar 10, 2009 23:14:47 GMT 8
yup...that's what happened with mine, hence the flimsy comment about the backpack. i'll probably do the same since it looks more solid that way. i only got to play with mine for about half an hour since i was already sleepy at that time. lemme try the nail polish and see how that goes.  i'm half tempted to just super glue the thing so it doesn't pop out.... the red section (the part that pops out) isn't supposed to move anyway. |
|
|
|
Post by V2 on Mar 10, 2009 23:25:13 GMT 8
using superglue is a no-no. not only will it "scratch" the surface of both ball and socket in the long term but if you plug it back too early you'll be stuck with a non-moving joint at all.
the red part? mine moves but not to the point it dislodges.
|
|
|
|
Post by qb on Mar 10, 2009 23:32:51 GMT 8
yup, just the red part... not the actual v-fins. those are tight. it dislodged when i first tried to move the v-fins forward when doing the transformation from MS to backpack. tried to put it back but it won't stay on. any suggestions?
|
|
|
|
Post by V2 on Mar 10, 2009 23:44:38 GMT 8
well, if thats the part then its okay to apply small amounts of superglue then.
|
|
|
|
Post by V2 on Mar 11, 2009 13:45:47 GMT 8
if you want to follow it LOGICALLY, yes. even the hcmpro version follows that. www.1999.co.jp/eng/10079906try imagining yourself as seraphim and position your arms like it does in backpack mode. |
|
|
|
Post by RainerO on Mar 11, 2009 21:33:59 GMT 8
There's another alternative place as dek posted. ;D no go there as well. both have already been bought. V2just wondering.... i checked the steps on the transformation: you remove the Serafim head when transforming from MS to backpack mode? aren't you just supposed to slide it downwards? personally, i found the backpack a bit flimsy especially with the awkward position of the Serafim head when slid in. also the V-fins in non-burst mode Gundam face seems to pop out easily on mine. does that happen to you as well? So they have only limited quantity on rd seravee/seraphim, it's a hot item nowadays. |
|
|
|
Post by qb on Mar 12, 2009 1:55:50 GMT 8
So they have only limited quantity on rd seravee/seraphim, it's a hot item nowadays. Yeah.... supplies are scarce as of initial release.... but who knows? they might suddenly start popping in malls the same way that 00, Arios and GN Flag did.  |
|
|
|
Post by V2 on Mar 12, 2009 6:24:53 GMT 8
honestly with wiki-type sites its best to take their info with a grain of salt. its best to go with dedicated sites like mahq. Yeah.... supplies are scarce as of initial release.... but who knows? they might suddenly start popping in malls the same way that 00, Arios and GN Flag did. as long as its 00-related mecha, bankee will bring it in. |
|
Drat, foiled again!
Jun 6, 2013 3:45:32 GMT 8
Jun 6, 2013 3:45:32 GMT 8
keeping the site active as a place to dump info for easier backtracking. 
keeping the site active as a place to dump info for easier backtracking. 
May 30, 2015 3:32:15 GMT 8
*