Post by danielgogeta on Aug 18, 2008 14:12:21 GMT 8
Beginning Assembly review:
Assembly Series one:
I opened the plastic display case within the box only to find out not all the trees are shown in the front case. Remainder of the parts are enclosed at the rear of white tree holder. Displayed on the left side are the trees.
I begin the chore of cutting the plastic parts off the sprue and setting them in place.
Note: Normally I do this for smaller less complex zoid models, but for larger kits I am unfamiliar with I trim and cut as the manual instructs me.
This system allows me to see all the parts in a glance and speeds up assembly.
Assembly Series two:
Then comes the real assembly. I first place the motor (similar to the cosmozoid motor except it has one winding lever on the left side) to the main chassis frame.
Then I check for chassis integrity by placing the main body halves for any misalignment.
Assembly Series Three:
After checking the body havles, I proceeded to the lever that actuates the head of the Twinhorn.
If not placed carefully, the Twinhorn's head wont move when wound up. Proper placement of this lever is essential.
Note: For static displays, you can do without the lever peice.
Assembly Series Four:
Assembling the legs. The leg parts are identical to that of Geruder and Zatton, and simplified leg assembly is also similar.
I would personally prefer the color red or grey instead of the dark blue color of the legs, just because the red gives the Twinnie a very royal feel.
At this stage, the windup works and walks fairly well and is very stable.
Assembly Series 5:
Placing the head, plus the other attachments such as the tusks, weapons and ears.
The zoid has a simplified structure though one can easily reverse the orientation of the ears.
At this point, the head and tusks and trunk is top heavy and gives the motor huge strain that the twinhorn wont complete it strides or at a lucky state move a couple of steps.
Removing the head actuator within the chasis increases its mobility though and can complete its walk cycle.
Personally the twinhorn would be better reconfigured to a power1000 series, such as brachios or arosaurer.The motor is inadequate to carry the head,trunk and tusk weight.
Comparison with the older issue:
Side by side with the older Twinhorn, there appears to be no physical alteration to the original mold.
The older twinhorn though has a duller red color due to aging though the dark blue parts have minimal discoloration.
Decals:
Decals are still the same as the older one, though with a better quality. However I do prefer waterslide decals than these thick metallic sticker sets, which were very popular in almost every 80's mecha line.
Overall Review (after assembly):
The Twinhorn is really a nice reissue to have, and its pretty much close to the original 86'version, well all except for the box.
An affordable alternative for both collectors and even kitbashers, since the originals fetch quite a high price at ebay.
Just like any of the reissues, I assume the release has a drastic effect on market prices, and as a consequence, lowered demand (ouch OR zoid hoarders)
The addition of the original DZ plate adds some value, however Zoid Graphics Malder and Gungy is currently a tough cookie to get.
Zoid Graphics magazine is a neat substitute rather than going for the zoids core package (percieved at 200USD value).
As for the zoid graphics layout and design, its color and layout does'nt make the Twinhorn much, since of the similar color contrast (sheesh its red over another shade of red). Its choice of typhograpy for the box is quite poor.
Initial Review:
Presenting review on the latest Zoid graphics reissue; Volume 5 Twinhorn!
Bankee was able to send me several orders of the limited Zoid graphics series, designed to re-issue zoids from the vintage era of 1983-1992. Takara Tomy is following its selling model for transformers but this time adapting a new exhibit box, a monthly graphics magazine and pieces of the diorama base.
Here's a quick review:
The Good:
The new packaging similar to signatured Takara Tomy transformers makes the Twinhorn exhibit impressive and ready for display in any cabinet or closet.
The Great:
TT is really going swell with the reissue of one of the most hard to get vintage zoids whose current cost on ebay would cost you a considerable portion of your monthly salary. Twinhorn is such a gem, whose vintage models came in 1988 to 1992, abundant in Hongkong and Singapore, and can easily go from $80 to $120 mint in box online.
The Splendid:
The Twinhorn reissue is now available in a limited release at a fraction of its inflated online price, very affordable to the modern day price conscious toy collector. The new release is very identical to the 80's vintage model, less the aging plastic and discoloration of course.
To add to its collectivity is the fact it comes with a diorama base part which when all graphic zoid issues combined, you can complete the Zoids Diorama base; a unique and rare item that still isn't reissued.
Plus you have colored magazine that even has actual model instructions.
The Lame:
Though the new packaging really rocks, it would have been better is Takara Tomy went to a next step by including the original box and packaging, just for added value for collectors who want the nostalgic vintage wind-up box.
The Recommedation:
Fetch two when its still affordable and still in the market.
For Photos:
danielgogeta.multiply.com/photos/album/100
For orders or trades contact me at danielgogeta@yahoo.com
Assembly Series one:
I opened the plastic display case within the box only to find out not all the trees are shown in the front case. Remainder of the parts are enclosed at the rear of white tree holder. Displayed on the left side are the trees.
I begin the chore of cutting the plastic parts off the sprue and setting them in place.
Note: Normally I do this for smaller less complex zoid models, but for larger kits I am unfamiliar with I trim and cut as the manual instructs me.
This system allows me to see all the parts in a glance and speeds up assembly.
Assembly Series two:
Then comes the real assembly. I first place the motor (similar to the cosmozoid motor except it has one winding lever on the left side) to the main chassis frame.
Then I check for chassis integrity by placing the main body halves for any misalignment.
Assembly Series Three:
After checking the body havles, I proceeded to the lever that actuates the head of the Twinhorn.
If not placed carefully, the Twinhorn's head wont move when wound up. Proper placement of this lever is essential.
Note: For static displays, you can do without the lever peice.
Assembly Series Four:
Assembling the legs. The leg parts are identical to that of Geruder and Zatton, and simplified leg assembly is also similar.
I would personally prefer the color red or grey instead of the dark blue color of the legs, just because the red gives the Twinnie a very royal feel.
At this stage, the windup works and walks fairly well and is very stable.
Assembly Series 5:
Placing the head, plus the other attachments such as the tusks, weapons and ears.
The zoid has a simplified structure though one can easily reverse the orientation of the ears.
At this point, the head and tusks and trunk is top heavy and gives the motor huge strain that the twinhorn wont complete it strides or at a lucky state move a couple of steps.
Removing the head actuator within the chasis increases its mobility though and can complete its walk cycle.
Personally the twinhorn would be better reconfigured to a power1000 series, such as brachios or arosaurer.The motor is inadequate to carry the head,trunk and tusk weight.
Comparison with the older issue:
Side by side with the older Twinhorn, there appears to be no physical alteration to the original mold.
The older twinhorn though has a duller red color due to aging though the dark blue parts have minimal discoloration.
Decals:
Decals are still the same as the older one, though with a better quality. However I do prefer waterslide decals than these thick metallic sticker sets, which were very popular in almost every 80's mecha line.
Overall Review (after assembly):
The Twinhorn is really a nice reissue to have, and its pretty much close to the original 86'version, well all except for the box.
An affordable alternative for both collectors and even kitbashers, since the originals fetch quite a high price at ebay.
Just like any of the reissues, I assume the release has a drastic effect on market prices, and as a consequence, lowered demand (ouch OR zoid hoarders)
The addition of the original DZ plate adds some value, however Zoid Graphics Malder and Gungy is currently a tough cookie to get.
Zoid Graphics magazine is a neat substitute rather than going for the zoids core package (percieved at 200USD value).
As for the zoid graphics layout and design, its color and layout does'nt make the Twinhorn much, since of the similar color contrast (sheesh its red over another shade of red). Its choice of typhograpy for the box is quite poor.
Initial Review:
Presenting review on the latest Zoid graphics reissue; Volume 5 Twinhorn!
Bankee was able to send me several orders of the limited Zoid graphics series, designed to re-issue zoids from the vintage era of 1983-1992. Takara Tomy is following its selling model for transformers but this time adapting a new exhibit box, a monthly graphics magazine and pieces of the diorama base.
Here's a quick review:
The Good:
The new packaging similar to signatured Takara Tomy transformers makes the Twinhorn exhibit impressive and ready for display in any cabinet or closet.
The Great:
TT is really going swell with the reissue of one of the most hard to get vintage zoids whose current cost on ebay would cost you a considerable portion of your monthly salary. Twinhorn is such a gem, whose vintage models came in 1988 to 1992, abundant in Hongkong and Singapore, and can easily go from $80 to $120 mint in box online.
The Splendid:
The Twinhorn reissue is now available in a limited release at a fraction of its inflated online price, very affordable to the modern day price conscious toy collector. The new release is very identical to the 80's vintage model, less the aging plastic and discoloration of course.
To add to its collectivity is the fact it comes with a diorama base part which when all graphic zoid issues combined, you can complete the Zoids Diorama base; a unique and rare item that still isn't reissued.
Plus you have colored magazine that even has actual model instructions.
The Lame:
Though the new packaging really rocks, it would have been better is Takara Tomy went to a next step by including the original box and packaging, just for added value for collectors who want the nostalgic vintage wind-up box.
The Recommedation:
Fetch two when its still affordable and still in the market.
For Photos:
danielgogeta.multiply.com/photos/album/100
For orders or trades contact me at danielgogeta@yahoo.com