tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on May 6, 2009 20:00:52 GMT 8
FG Exia Repair, hope you guys enjoy
(*NOTE* Most pictures were taken with low light source to emphasize the detail of the LEDS while in the dark)
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on May 10, 2009 17:34:34 GMT 8
A look into my and my brother's collection: Wing Gundam Ver. Ka NG Destiny vs Strike Freedom ZETA Gundam version 2.0 NG Sword Impulse NG Astaea Type F-2 HG 1/100 Wing Zero Custom HG 1/144 00 Gundam HG 1/144 Shiraniu Akatsuki TFM: Megatron Leader Class TFM: Optimus Prime Night-wAtchEr Class That's it for now thanks for looking
|
|
|
Post by PilapZ on May 10, 2009 21:48:19 GMT 8
nice! your brother has a nice collection going there. are they painted too?
|
|
|
Post by RainerO on May 11, 2009 0:11:35 GMT 8
Your brother has also nice choice of collections.
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on May 11, 2009 6:22:15 GMT 8
Usually what he does is snap build it together, while it is my job to modify and fix it.
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on May 20, 2009 18:16:33 GMT 8
Some of my current WIPs (taken from my thread at PG) I finally succeeded on adding articulation to the side skirts, this was done by gluing some sprues in the center of the piece and adding a polycap near the end. Test Fitting to the armor, polycap was held by molding epoxy clay to the hollow points of the side skirts/beam saber container. "Does it move? Why yes! ;D"Okay now that one is dealt with, here's a shot of the model attached to the modified torso Now it can rotate 360. Plus it fits nice and snugly, but I further tightened it using superglue . Although there is still a gap in between, I am planning cover it up and add "inner machinery" details between it using hoses, old discarded wires, etc. Unarmed Shot Like I said, I fixed the proportions between the torso and legs...but still thanks to the arms it still looks fugly. Guess that will be my next stop, adding thickness to its arms Wish me luck, and do give comments to help me with this WIP. Progress : 30%Things to do: a. Add waist articulation - doneb. Allow the end on the booster to move in and out at the end (like the HGUC) - (Still thinking hmmm) c. Separate the foot guard, to allow it to move. d. Separate sideskirts to enable it to move. - donee. Widen the shoulder armor to make it more in proportion. f. Eliminate seam-lines, using super glue and putty. g.Tidying up h. Paint it in its true colors (the kit only came in blue, black, and very dark grey)
|
|
|
Post by vic01 on May 27, 2009 12:26:48 GMT 8
I remembered when i bought that old GP02A @ SM 10 yrs ago. Keep us posted w/ the mods! vic01
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on Jun 17, 2009 19:49:00 GMT 8
Will do sir vic! And this is what I managed to pull out after a long period of thinking. Just a few updates before putting this guy into storage (till I get the necessary tools and option parts) Replaced the whole torso-to-leg system since its filled with lots of flaws, changed it with the leftover torso joint I found on my HG 1/144 Verde Buster. Just super glued in the armor pieces and this is what we have... The front skirt and sideskirts still moves. Back Skirt will be remained fixed due to balancing issues.Also changed the polycaps on the legs in favor of a much longer one which came from the 1/144 Strike Noir Marked the area which will be separated to enable the feet to be more articulate (I plan on making the leg system similar to the Buster's) Replaced one of the plastic connectors of the Wing Booster units in favor of a much sturdier polycap (also came from the 1/144 Strike Noir) Replaced the polycap on the torso to accommodate the new joint. Also changed the polycaps on the arms with much longer ones from the Strike Noir (this actually saved me the trouble to extend each section of the arms). The upper portion will be bulked with epoxy putty since its out of proportioned. The hands were also replaced with the leftover polycap hands from the 1/144 Zaku 2, just took a spare ball jointed socket from the polycap trees of the Strike Noir Overall look so far: Finally the arms no longer sag down thanks to the new hands and joints. Still waiting for the putty to dry so I can't attach it yet That's all for now, will probably think of other ways to improve the appearance of the kit. *Additional Updates* This would probably be my last update before placing it temporarily on hold Successfully separated and added a rotating articulation to the legs, in doing so it also made the legs longer Rotates and fully functional (well I still need to fill in a few imperfections between the two halves) Final Look of the Model OMG! , I can't believe it but it looks extremely similar to the box-art of the MG GP02A. Does it now look like the HGUC version if I may ask (since I don't own the HGUC version)? , any tips on what topcoat will match the kit Gloss or Flat?
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on Aug 25, 2009 22:18:59 GMT 8
Let's update this with my new acquisition, the HG 1/144 0 Gundam (ACD version) And OMG I really love this kit, can't take my chances in making this baby slip away again after it went on sale at GT Alabang (got it for PHP 630 as opposed to its original price of PHP 700). I love this guy ever since it went out so much, that I pre-ordered the upcoming Rollout version which comes with the "Angelic Wings" GN grain effects from HLJ. I might post a review soon in order to show of its articulation and gimmicks, but for now enjoy some poses with my HG 1/144 Exia recreating the final moments in the show. GN Drive of Exia painted with unthinned Tamiya Clear Green enamel, while the 0 Gundam was painted with a Glow in the Dark Neon Green paint, do tell me which one looks better. Light off...for dramatic effect (too bad I don't have any green light to give emphasis Final shot.... Final Thoughts about the HG 1/144 0 Gundama. Articulation is absolutely fantastic! It can recreate any pose from the show, and can outmatch the 0 Gundam in terms of articulation. Plus it has an additional hole hidden on the back-skirt where a stand can fit into, enabling the model to recreate angelic poses Wing Zero Custom can only pull-off b. Accessories are ok. The GN Rifle, although small, is extremely detailed and very cool looking (although mine did have trouble in holding it steadily) c. The shield is well-made, and needs no painting to look good. d. GN Drive and GN Particle Container...Ribbons or Lasse? Pick your pilot (personally I vote for Ribbons since he kicks ass in the suit) e. Great replacement for an RX-78-2 since the two are almost identical, however the 0 Gundam is something like a modernized RX-78 giving it more badass factor f. And finally, the verdict....should you get the RD 0 Gundam, the ACD version, or the Rollout version? Personally I vote for the any of the three, however we must also take into consideration the colors and accessories. For the ACD version and RD version you get the extra GN Particle Container, the RD has extra hands, while the upcoming Roll-out version will come with the Angelic Wing effects as seen on episode 1 of S1. And since the ACD and the Roll-out colors version is priced the same (1200 Yen or PHP 567), the Roll-out version is definetely more worth it, but don't let that fact stop you from getting the ACD version. You will definitely won't regret it. Anyways, that's all for now...will probably post pictures again after the arrival of Rollout 0 Gundam, or if I get enough time
|
|
|
Post by V2 on Aug 31, 2009 8:54:27 GMT 8
nice comment on the 0. looking forward to more progress on the GP02!
|
|
tri3dge
DX Gashapon Super Robot
Posts: 241
|
Post by tri3dge on Sept 7, 2009 18:45:36 GMT 8
Thanks kuya v2. The Gp02a project will now resume once again, I just clearing up my schedule before resuming it again. I've also now solved on how to make the wing boosters articulated. Anyways for now, here are some commercial updates: Just a quickie, Just wanna share something that I've been working one for some time (just decided to take it up again) HGUC Z'Gok Type E (Char Aznable Custom)
Just a simple repaint of the HGUC Zgok Type E, colors where based on Char's Zgok and I must say it turned out ok. I'm not yet done as of now since I still have to paint in some details and clean it up a bit (especially the underwater support jet). Colors where painted using Semco Acrylics (Red), and a mixture of poster paint (yellow and acrylic red) for the orange details. The black details where made using a mixture of Semco Clear Gloss Varnish, black acrylic, and a bit of silver (2:1:1 ratio). I'm planning also to drill another hole on the monoeye hatch, since its not movable. I apologize for the hazy picture since the camera's battery is low, but I'll try to post more once I'm done. Do tell me what you guys think
|
|
|
Post by RainerO on Sept 8, 2009 18:50:59 GMT 8
A nice detailed description on your 0 gundam and hope to see more pics on your zgok. ;D
|
|
|
Post by qb on Sept 8, 2009 21:48:50 GMT 8
nice review of the 0 Gundam and I'm loving the colors for the Char's Z'Gok! ;D
|
|
|
Post by adbenturero on Sept 9, 2009 14:23:04 GMT 8
great shot on the final battle between 0 gundam and exia!
|
|
|
Post by miasong on Sept 10, 2009 5:13:21 GMT 8
I really do admire your skills lad!
|
|