jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 24, 2005 0:05:48 GMT 8
guys.... panu nyo na papaint yung gundam kung kunwari gusto ko kulayan ng red ang part niya na color blue?? diba kasi if u paint it directly panget ang labas niya?? u have to put white as base of the paint?? eh un pag apply ng white di din ako marunong kasi wen i use my white na gundam markers puro liquid ang lumalabas at di siya masyado kumakapit... how do i apply the white paint right??
|
|
|
|
Post by genocide on Jul 24, 2005 0:12:08 GMT 8
bka pangit lang na marker ung napunta syo? kc nagkaron na din ako ng marker na pangit pero red sya... my white marker seems ok nman...
|
|
|
|
Post by Uberjam on Jul 24, 2005 0:22:32 GMT 8
i use white lacquer paint for white parts... white sya talaga and its a much consistent white and best thing about it, if you apply it right, the paint evens out on itself.
have you tried shaking it para magmix yun paint nya sa loob?
|
|
jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 24, 2005 8:29:55 GMT 8
yup i did... meron ba sa tobys nung white laquer na paint?? un white na spary sa lata kaya ok na?? but anyway.. aftr ko apply un white na pait.. ilalagay ko na un desired na color dba para lumitaw ng maganda un paint sa plastic ng gundam?? tnx..
|
|
|
|
Post by Uberjam on Jul 24, 2005 12:47:14 GMT 8
i think masmaganda kung gamitin mong primer is color gray... i think mastama yun color na yun instead of white? im no expert really, this is just my observation of what other modellers are doing.
they use a gray colored primer with some other specifications (may iba ibang klase pa kasi ng primer, i think?), then they apply the second coat... yun desired color na.
spray paint is ok.
|
|
|
|
Post by Daycot on Jul 24, 2005 16:38:40 GMT 8
If you really want a good primer, you should use the Tamiya Spray primer or the Mr. Surfacer 1000 primer. They both come in white and gray colors. You can also use cheaper alternatives like common spray paints in your local hardware but be sure that it is plastic friendly. Pylox is ok but it is lacquer based. You can also look for the Bosny spray primer. Its is the cheapest (daw?) but good luck finding it. If you do find it, give me a holler ok?  |
|
jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 24, 2005 22:06:11 GMT 8
ei tanx for the advice... i got myself a mr. resin surface primer color gray for P350.. ill try it tom.. spray din un.. naghahanap nga ako kung sakali meron nung hindi spray eh kasi i was thinking mahirap magbalot ng part ng gundam kung maliit lang ang ipprimer mo..
|
|
|
|
Post by Uberjam on Jul 24, 2005 23:27:11 GMT 8
whoa whoa whoa... before you do that, ano pang balot mo? what tape are you using? kasi ang alam ko may issue rin ang mga tapes when it comes to spray painting... may naiiwan daw kasi na adhesive from the tape. heard about that?
|
|
jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 25, 2005 7:57:35 GMT 8
yup i learnd that the hard way... un pininturahan ko un shield ng blitz.. i used masking tape na nabibili sa natonal bookstore.. ang daming na iwanan na adhesive.. hehehe... meron din ako nabili na masking tape sa national pero diferent kind.. ang roblem namn niya ay tumatagos un paint saknya... hehehe... wat do u use ba??
|
|
|
|
Post by Hayabusa on Jul 25, 2005 8:48:53 GMT 8
Suggestion, try mo yung Tamiya masking tape yung kulay dilaw. Wala siyang naiiwan na adhesive kapag tinanggal at manipis & flexible siya para madaling makapag-conform sa surface ng plastic.
|
|
jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 25, 2005 9:59:32 GMT 8
tnx for the tip... ill buy it later with in the day... anu pa b mg tip sa pagpapaint??
|
|
|
|
Post by Uberjam on Jul 25, 2005 12:15:24 GMT 8
DON'T INHALE THE FUMES!!!
hahaha ;D
|
|
|
|
Post by Daycot on Jul 25, 2005 16:48:46 GMT 8
Have PATIENCE! LOTS of it! I mean it in every aspect!  |
|
jefmyster
Gashapon Super Robot
"Remember when I used to play for all of the loneliness that nobody notices now"
Posts: 98
|
Post by jefmyster on Jul 25, 2005 22:13:38 GMT 8
ayt.. tnx!!! ill certainly not forget not to inhale the fume and not to taste the paints!!! hahahaha thnks for the help guys
|
|
daemon33
SD Gashapon Super Robot
Posts: 5 
|
Post by daemon33 on Jul 26, 2005 4:56:37 GMT 8
How about if you just use a handbrush, how would you go about doing the paint job?
1. Apply Primer (Mr surfacer)?
How do I thin this primer?
2. Paint Proper(what type of paint)?
2.1 Acrylic (gunze hobby color or tamiya?)
2.2 Enamel (gunze mr color)
Ano ang pwede ko bilhin for thinners?
and pano if i do a "wash"(panel lines) afterwards, ano ba ang mas ok i paint ng una? enamel or acrylic?
3.Clear coat/dull coat
Ganito pa rin ba yung mga steps?
Thanks sa pag reply.
|
|
keeping the site active as a place to dump info for easier backtracking.