Post by freaky on Feb 27, 2008 11:12:39 GMT 8
Review withPictures
The box
Open Box, front page of manual
Sprues1
Sprues2
Finish Head part with paint and paneling
Chest part side view
Chest part (with Zoid core)
Chest part (close panel)
Back Body
Body
Ah wat u call it?? Smoke despenser?
Guns and thingypit
Body w.o feet
Front Legs Parts
Front Legs
Back Leg parts
Back Legs
Complete HMM02
Side view
Top View
Other View
Review
HMM 02 - Command Wolf
Well this is my first HMM and what can I say, its good. assemble it is very satisfying. Imagine to assemble the head took me almost an hour(complete with painting and paneling). Next is the front body, a nice gimik is the zoids core that HMM01 has. The first concern here is its smaller than the original CW. Another is you need to glue the joints for the feet coz it looks tight but when you connect the feet it tend to fall off. Next is the hose that connects from the neck to the body, when fully assemble their are times it disconnect. The Back body is also a nice build, with a gold part at the back that acts as support. When the body is fully assemble, it can bend side ways for a limited degree. Next will be the weapons, the smoke despenser can be easily be build, nice colors that complements each other but its bigger than the original CW as stated by others which is true. The cannons of the original CW is small and has an open thingypit, HMM02 includes a canopy for the thingypit and 2 new seperate guns than can tilt in a limited angle and although the cannons and smoke despenser hit each other on certain position.
Next is the feet a nice satisfying build with many articulation for the feet. The shoulder feet armor here covers the front part compare to the original CW which only cover the expose part.
The last will be the tail, new style and it contains a booster, will take more picture to show it.
This kit has 2 canopy for the thingypit, one orange and one gray.
Rating
9 out of 10
The Good
satisfying build..you will be taking a long time for this.
very nice articulation
new look is good
The bad
some parts must be glue
looks dead without panel lining(paint is optional)
recomended to zoid collectors that need a challenge build.
Thanks for reading!
The box
Open Box, front page of manual
Sprues1
Sprues2
Finish Head part with paint and paneling
Chest part side view
Chest part (with Zoid core)
Chest part (close panel)
Back Body
Body
Ah wat u call it?? Smoke despenser?
Guns and thingypit
Body w.o feet
Front Legs Parts
Front Legs
Back Leg parts
Back Legs
Complete HMM02
Side view
Top View
Other View
Review
HMM 02 - Command Wolf
Well this is my first HMM and what can I say, its good. assemble it is very satisfying. Imagine to assemble the head took me almost an hour(complete with painting and paneling). Next is the front body, a nice gimik is the zoids core that HMM01 has. The first concern here is its smaller than the original CW. Another is you need to glue the joints for the feet coz it looks tight but when you connect the feet it tend to fall off. Next is the hose that connects from the neck to the body, when fully assemble their are times it disconnect. The Back body is also a nice build, with a gold part at the back that acts as support. When the body is fully assemble, it can bend side ways for a limited degree. Next will be the weapons, the smoke despenser can be easily be build, nice colors that complements each other but its bigger than the original CW as stated by others which is true. The cannons of the original CW is small and has an open thingypit, HMM02 includes a canopy for the thingypit and 2 new seperate guns than can tilt in a limited angle and although the cannons and smoke despenser hit each other on certain position.
Next is the feet a nice satisfying build with many articulation for the feet. The shoulder feet armor here covers the front part compare to the original CW which only cover the expose part.
The last will be the tail, new style and it contains a booster, will take more picture to show it.
This kit has 2 canopy for the thingypit, one orange and one gray.
Rating
9 out of 10
The Good
satisfying build..you will be taking a long time for this.
very nice articulation
new look is good
The bad
some parts must be glue
looks dead without panel lining(paint is optional)
recomended to zoid collectors that need a challenge build.
Thanks for reading!