Post by dri1 on Oct 31, 2005 11:39:05 GMT 8
Hi guys
Zoids Power Up Parts Set B are a Grade Up Unit for GZ-12 Lan Stag & GZ-14 Deadly Kong though you can use it to other Genesis Zoids as well. ZP-B comprises of Twinkle Breaker & Scissor Arm.
The box comes in corrugated carton box same as Customize Parts CP-16, CP-22, CP-23, CP-24, CP-25, CP-26 & CP-27. One interesting note is that it does have the Z-Points on the flap (08 points)
The bits Comes in 2 sprues, 2 loose parts & instruction sheet. No sticker sheet provided.
The Built Model
-Top: Scissor Arm
-Bottom: Twinkle Breaker - The paint finish is fantastic, 2 tones of gold (flat & glossy).
Twinkle Breaker
Equipped to GZ-12 Lan Stag you need to remove the front horns to place the Twinkle Breaker. If you already have the GZ-12 Lan Stag you will know that the original horns are made of light plastic material. The Twinkle Breaker are made of rigid & heavy plastic material thus the head won't secure on the upright position
it keeps on bowing it's head with this heavy stuff attached on it 
Equipped to GZ-14 Deadly Kong same issue with GZ-12 Lan Stag, the Twinkle Breaker is too heavy that you cannot extend the arms as it's keep on falling down
Equipped to TRU Murasame Liger No issues at all, properly secured
Scissor Arm
Equipped to GZ-14 Deadly Kong It doesn't rotate (if you read it in the other Forums), it only extend & retract
Equipped to GZ-12 Lan Stag
Equipped to TRU Murasame Liger
The Good
-Something new for the Genesis Zoids Line
-Plastic is of good quality
-Perfectly made for GZ-14 Deadly Kong
-The Twinke Breaker is a good add-on for GZ-10 Murasame Liger
The Bad
-As mentioned above the Twinkle Breaker is too heavy for GZ-12 Lan Stag & GZ-14 Deadly Kong
The Zoids Power Up Parts Set B is a good buy but suggest you wait until it's readily available in local stores. If you haven't got the GZ-12 Lan Stag yet, just wait for the new Lanstag coming out later as it is already equipped with Twinkle Breaker & w/ nicer color scheme as well.
Cheers to everyone ;D
dri1
Zoids Power Up Parts Set B are a Grade Up Unit for GZ-12 Lan Stag & GZ-14 Deadly Kong though you can use it to other Genesis Zoids as well. ZP-B comprises of Twinkle Breaker & Scissor Arm.
The box comes in corrugated carton box same as Customize Parts CP-16, CP-22, CP-23, CP-24, CP-25, CP-26 & CP-27. One interesting note is that it does have the Z-Points on the flap (08 points)
The bits Comes in 2 sprues, 2 loose parts & instruction sheet. No sticker sheet provided.
The Built Model
-Top: Scissor Arm
-Bottom: Twinkle Breaker - The paint finish is fantastic, 2 tones of gold (flat & glossy).
Twinkle Breaker
Equipped to GZ-12 Lan Stag you need to remove the front horns to place the Twinkle Breaker. If you already have the GZ-12 Lan Stag you will know that the original horns are made of light plastic material. The Twinkle Breaker are made of rigid & heavy plastic material thus the head won't secure on the upright position
it keeps on bowing it's head with this heavy stuff attached on it 
Equipped to GZ-14 Deadly Kong same issue with GZ-12 Lan Stag, the Twinkle Breaker is too heavy that you cannot extend the arms as it's keep on falling down
Equipped to TRU Murasame Liger No issues at all, properly secured
Scissor Arm
Equipped to GZ-14 Deadly Kong It doesn't rotate (if you read it in the other Forums), it only extend & retract
Equipped to GZ-12 Lan Stag
Equipped to TRU Murasame Liger
The Good
-Something new for the Genesis Zoids Line
-Plastic is of good quality
-Perfectly made for GZ-14 Deadly Kong
-The Twinke Breaker is a good add-on for GZ-10 Murasame Liger
The Bad
-As mentioned above the Twinkle Breaker is too heavy for GZ-12 Lan Stag & GZ-14 Deadly Kong
The Zoids Power Up Parts Set B is a good buy but suggest you wait until it's readily available in local stores. If you haven't got the GZ-12 Lan Stag yet, just wait for the new Lanstag coming out later as it is already equipped with Twinkle Breaker & w/ nicer color scheme as well.
Cheers to everyone ;D
dri1
