|
|
Post by no3Ljm on Sept 23, 2006 19:59:21 GMT 8
maldit0
then ask 1 for an early Christmas gift. ;D
|
|
|
|
Post by maldit0 on Sept 23, 2006 21:12:22 GMT 8
maldit0
then ask 1 for an early Christmas gift. ;D
I told him that. But he said : "That's what you said last year db?" So walang lusot ;D |
|
|
|
Post by delta408 on Sept 23, 2006 23:05:13 GMT 8
Hahaha, well, if you're getting one kit, better make it a BIG one. ;D
|
|
|
|
Post by qb on Sept 24, 2006 7:49:04 GMT 8
Agreed. Why don't you get an MG Sazabi?......  |
|
|
|
Post by delta408 on Sept 24, 2006 8:55:13 GMT 8
Aren't we all helpful, sir quattro03? ;D
|
|
|
|
Post by no3Ljm on Sept 24, 2006 11:52:20 GMT 8
MG Sazabi??? small time yun. if you're going to ask for one kit... ask for one PG KIT!!! that's it, pancit. hahaha!!! ;D
|
|
|
|
Post by maldit0 on Sept 24, 2006 19:48:55 GMT 8
Hahaha! A PG? ASa pa ako ;D My dad is complaining na nga about the MG Strike ROuge's price eh! Php 2,500.00 nga lang yun eh compare to the price of his Mixer and Loudspeakers. Not to mention his guitars and his music collections!  Haay.... sorry for whinning on your thread sir delta. |
|
|
|
Post by delta408 on Oct 1, 2006 20:25:07 GMT 8
WIP Continued: The backpack is now complete, puttied and primed.  Looking at my Holy Grail kit, the Core-Works MSZ 010-S Gundam ZZ Ver Ka Conversion kit, I noticed that the V-fin looks like the Sentinel V-fin which I have with this FAZZ kit. An added plus is when I discovered that the Sentinel FAZZ has extra parts to build the original ZZ Gundam head (woohoo!) I then decided to scrap the Sentinel head and use the original head combined with the High Mega Cannon (HMC) and Sentinel V-fin. Please take a look at the pic from the Core-works site:  Now a bit of a problem arose when putting the head, and HMC + Sentinel V-fin together: They were not made to fit!!! The original Gundam ZZ head has its own HMC+V-fin assembly but I wouldn't have the exact same look as the conversion kit. That V-fin is TOO SMALL. Feeling in the mood to experiment, I set to work. While the HMC I wanted to use has a socket for a peg to make an attachment, the Gundam ZZ head also had a hole for a peg. This wasn't going to allow both parts to be joined. Taking a steel paperclip, I cut 1 cm off with pliers which I then inserted into the assembled Gundam ZZ head and glued into place. Testing for fit was then done to see what else needed to be done. Another issue arose when I found there would be a BIG hole since the back of the HMC would protrude a bit. I remedied this with a bit of Tamiya Basic Putty. A lot of sanding, minor reapplication of the putty and priming resulted to a nice looking Gundam ZZ head, which I think isn't too bad for my first mod on a Gunpla kit. ;D    The rainy season has made it impossible for further priming so I'll proceed to building and sanding until a sunny day arrives.  Till the next Update. Cheers!!! |
|
|
|
Post by qb on Oct 1, 2006 21:12:30 GMT 8
Aren't we all helpful, sir quattro03? ;D Of course.... ;D Always glad to give a fellow Gundamer a lil push in the *ehem* right direction. Btw, cool update on the FAZZ. Looking forward to the finished product.  |
|
|
|
Post by r2d2t2 on Oct 2, 2006 8:13:25 GMT 8
makes me wanna skip the legend and do the FAZZ. but no... patience... patience! funny coz i plan on doing the same thing on the head - use the original ZZ head and the Sentinel V-fin. looking forward to ur finished product man |
|
|
|
Post by Naffziger on Oct 3, 2006 19:10:05 GMT 8
Nice modification on the head. I even consider that on my FAZZ but I opt not to do it because of fear that I might mess up. Keep us updated on this one. Who knows, I might get another FAZZ and do the same modification, with all gray, no armor version of it.
|
|
|
|
Post by delta408 on Oct 3, 2006 20:32:42 GMT 8
Thanks guys. I was really afraid that I'd mess up the mod for the FAZZ head but it worked out fine. Maybe if I could get some styrene sheets and epoxy putty, I could go to town modifying my kits. ;D |
|
|
|
Post by delta408 on Oct 10, 2006 1:06:16 GMT 8
Got busy for a few hours this week and my FAZZ is about 85% done. Here's a quick preview of my work so far:  I felt a bit morbid so I posed my FAZZ holding its head in its hands (Sleepy Hollow ;D ). THe FAZZ is really massive when you attach the armor and even without the chest plate, it still looks intimidating. Looks pretty good considering this is my first attempt at painting Gunpla but I still need to seal all the gaps, sand and prime the guns, and a few other pieces (missile towers(?) on both shoulder armors) then paint the whole FAZZ. I Hopefully, this kit will be complete by this Saturday. Cheers!!! |
|
|
|
Post by no3Ljm on Oct 10, 2006 15:34:35 GMT 8
nice updates.
|
|
-Mats-
DX Gashapon Super Robot
Posts: 224
|
Post by -Mats- on Oct 16, 2006 17:54:18 GMT 8
looking good there sir delta! |
|
Haay.... sorry for whinning on your thread sir delta.
Jun 6, 2013 3:45:32 GMT 8
keeping the site active as a place to dump info for easier backtracking. 
May 30, 2015 3:32:15 GMT 8
*